Hi, this is Wayne again with a topic “YOSHOPO Y3000 | Swappable Batteries for Endless Power”.
But before we start today’s video subscribe to our Channel hit the Bell notification icon like share and comment to this video today I’ll be trying out this all-in-one portable power station. It’S got a powerful and long lasting 2300 watt hour battery and has a rated power of 3 000 Watts. The controller has a variety of outputs to meet all of your needs. It features two surge protected wall outlets and a beautiful LED screen. There are three different ways to charge the battery there’s a 12 volt DC input, the solar panel input and a 120 volt AC input in the back. This unit also has two fast charging: usba outputs and a USBC output.
And lastly, it’s got a powerful 12 volt DC Outlet, which is compatible with a variety of devices. The controller and Battery are two separate pieces and are very easy to transport, considering the size and capacity of this battery, it’s actually really lightweight. Each piece has its own handle and they stack nicely on top of each other.
This Ultra thick cable is equipped with safety clips and will connect the controller to the battery. The smaller cable connects to any wall socket and is the fastest way to charge this power station also available. Is this adjustable pull cart, which makes it easy to transport your power station? The solar panels fold up nicely as well I’ll, be using this power station to upgrade the solar system on my off-grid converted School Bus. My existing system is made from a 100 watt solar panel, a deep cycle battery and a simple 100 watt inverter with this system. I was only able to power one device at a time. The supportable solar panel array is much more powerful than my existing 100 watt panel.
All the connections are built into the panel and it can be set up pretty much anywhere here. You can see just how easy it is to move around the power station. The first thing we need to do is connect the controller to the battery, make sure the plug is inserted completely and that you have a good connection. Next, we’ll connect this 120 volt plug. This is what we’ll use to fast charge the battery. I can easily lift the battery controller and the car all at once, if necessary.
Now that everything’s connected, we can power on the unit. It came pre-charged with 31 battery and is showing 19 hours of battery life. It only takes two and a half hours to fully charge and it’s currently charging at 1400 Watts. This power station can run pretty much any 120 volt Appliance.
It could even run this heavy duty impact drill. You can see here on the screen that the drill is pulling over 600 watts of power. The power output is strong and consistent, never hesitates and the drill works as it should.
Let’S plug in a mini, fridge and see how the power station handles it. This fridge uses roughly 50 watts of power, and you can see here that I can run the fridge for over nine hours with only 39 battery and I’m not even connected to the solar panels. Yet you can find all the solar panel wiring in this convenient zipper.
Pouch the wiring is already connected to the solar panel. All you have to do is connect this cable to the front of the controller, even on a cloudy day, these solar panels can generate between 30 and 50 watts of power when they’re in full sun they’ll produce. Well, over 100 watts and will charge your battery pretty quickly the Quick Charge USB A and C ports will charge any device you have quickly and easily. This thing can do it all if you’d like to learn more about the yoshopo power station click, the link below .