Weekend Project: Ultimate Shop Glasses

Weekend Project: Ultimate Shop Glasses

Hi, this is Wayne again with a topic “Weekend Project: Ultimate Shop Glasses”.
Think about your favorite pair of shop, glasses, they’re, useful enough, and they protect you from going blind when using tools. But how would you improve them in this weekend project by jude pullen we’re going to make them a million times better by adding a pair of positionable lights using sugru and magnets. These magnetic lights, stick to the side of your workshop glasses, allowing you to direct light to illuminate where you are working. What’S more, the magnets allow the lights to be detached and repositioned anywhere from metal surfaces to being combined with tools. This is a really short project and you’ll only need a handful of materials, and the only tools you’ll need are a pair of sturdy cutters and a pen make sure your led lights have the ability to be switched on permanently, instead of being activated by squeezing the Housing then use the cutter to trim away the keyring. Do the same for the other led light before we apply the subaru. We need to mark the magnets, so we don’t mix up the polarity, separate them into two pairs and then separate them into individual magnets, recall which surfaces were facing each other and mark them with the same letter or symbol open up the packet of sugru and separate It into the sizes you see here, giving each piece a good 30 seconds of kneading for each one, press, the subaru onto the smooth side of the led lights, making sure that you don’t cover any of the screw holes press the magnets into the subaru, so that The markings you made are facing outward make sure your glasses are free of dust and grease and then press two more of the sugru blobs onto the side panels make sure there’s plenty of surface contact between the sugru and the plastic by checking for air bubbles. On the inside once again press the remaining two magnets into the sugru, with the markings facing out with the sugru, you have remaining place, tiny blobs of it on the side of the led bulb that will be closest to your face. These will help protect your eyes from the glare without compromising the light from the bulb leave to dry overnight and you’ll have the ultimate pair of workshop classes. If you liked this video subscribe to our website or send us a comment on facebook or twitter be sure to check out our other project videos or visit us on makezine.com .