Hi, this is Wayne again with a topic “Waterfall Bathroom Sink Faucet – Unbox and Installation of 3-Hole Modern Waterfall Style Faucet”.
Hello guys uh today’s project is installation of this Basin faucet and the one which I am going to replace. Is this one? As you see, this one is a standard Basin, fauceter uh. I guess three holes, one two and three, and once we remove it we’ll and the one which I am going to replace this one with is this one that is the brand? Is water sound if we open the box, it comes with the manual and the Basin. Faucet is going to look something like this, so this is to control the hot water. This has to control the cold water.
This is to control the this is the actual faucet and all these three parts there’s three different parts: main faucet body, hot water, controller, a red one, cold, water, controller, blue, one, quick connect pipes, not like the treatment pipes and that’s the beauty of this one. It is not going to take more time because of this quick, connector installation. The way quick connect installation goes is that this goes this you have to press and then once the pipe is inside this one just leave it and it will be permanently. Of course, one one part of this hot water and cold water supply pipe has thread which you have to install underneath the underneath the faucet or Basin, and this is what I was referring to. I have unscrewed this one, this Pipeline and this pipe same thing. We have to do it for the pipe also and both the pipes are out and now I’m just removing this nut, holding the faucet onto the Basin and now as soon as um those nuts are removed. This old faucet will come out very nicely now. Let me show you how easy this installation is.
So basically, this is our main faucet body, so this main faucet body is going to go like this, and this has a plug-in plate, pipes which we have to connect, enlarge both the holes, left and right holes or to control the water level and now both of Them are going very nicely so just to give you the um to show you how exactly it is going to look. So this is the main faucet body. This is the cold controller, cold, water, controller and sorry hot water controller, and this one is the cold water controller. So underneath the sink, you have to pass this um washer and make sure that the washer has two surfaces. One is the groove surface and one is the flat surface. So flat surface will go like this right, then the steel washer, and then they are not the handles, are in place. Everything has been connected, and now we have to just connect the pipeline and designation and this pipeline is, it is straightforward, it is a so now next step is going to be connecting this supply line to the hot and cold side. So this one, the one which has a blue color strip, that one is the cold water, the one with the red color is the hot water.
So this will go to the supply line. This will go to the supply line for Hot and Cold, whereas this one we have to connect it to the controller. Using these threads. You can manage to connect these pipes to the handles without any problem started the power supply, and there is no leakage or anything is over here, and this is what you see.
This is the cold water. This is the hot water and a pretty nice flow of water is coming. If you want to go financially like like, let’s imagine that after some days it issue with the power it comes with, a additional Filter Works on. So you can always change those filters or clean those filters in the existing one, but otherwise it is installed very nicely and it looks good also and one thing which I want to mention earlier – this you can rotate in any direction for buying this product on the Amazon and thanks for watching the brand is a water song.
.