Unlock Your iPhone Potential:Converting eSIM to Physical Dual SIM

Unlock Your iPhone Potential:Converting eSIM to Physical Dual SIM

Hi, this is Wayne again with a topic “Unlock Your iPhone Potential:Converting eSIM to Physical Dual SIM”.
For the US, iPhone 14 Apple Inc. has completely replaced the physical SIM with an eSIM For global cell phone resellers. This change has raised the threshold for the US version iPhone to the local market and reduced profits.. Today, REWA LAB will share with you how to change. Esim to physical dual SIM card, You can check the info box for specific links to tools used today. Let’S take a look at how eSIM works before we move forward. As shown, we are going to remove eSIM, relevant resistors and reconnect SIM circuit accordingly to recover the SIM card circuits to make dual cards work, Check, Carrier Lock, Check, IMEI1 and IMEI2 Next, we’ll start the operation Take out the motherboard and the SIM card slot.

Remove the buffer foam, We can see the physical card slot reserved on the motherboard. The next step is to clean the adhesive Before cleaning we tap some high temperature heat resistant tape to protect the motherboard Heat it and remove the adhesive Clean the residue with PCB Cleaner. The clear glue is done.. We can clearly see the pins of the physical SIM card data resistor.

Unlock Your iPhone Potential:Converting eSIM to Physical Dual SIM

Next we open bitmap and examine the circuit distribution of physical, SIM, 1 and SIM 2 To restore the physical dual-card function. The resistor connecting to eSIM needs to be removed and the corresponding circuit of SIM1 and SIM2 need to be short-circuited Now Remove the eSIM circuit’s resistors After removing the resistors use PCB Cleaner to clean the motherboard, Add some paste flux to the motherboard to reball the bonding Pads After reballing clean the motherboard with PCB cleaner, again Short-circuit, the circuits of SIM1 and SIM2 Scrape off the bonding pad and reball. Clean, the motherboard add the 4.7K resistor Solder, the other end of the jumper wire to the test point Clean. The motherboard again Apply the UV curable solder, mask solidify it with a UV, curing lamp. Install Physical Card Insert into Card Slot Attach to the motherboard and test Both network shows now Check.

Unlock Your iPhone Potential:Converting eSIM to Physical Dual SIM

Imei1 IMEI2 Call is normal, Above is our sharing of the dual-card modification for the iPhone 14 Plus US version. Wylie has launched a tool kit for iPhone 14 series. Currently, further details can be found through REWA Shop. Also REWA Academy will launch iPhone online live-streaming courses in April. Don’T miss out .