Hi, this is Wayne again with a topic “This is (probably) your next case – Lian Li @ Computex 2023”.
We’Re here at the Lee and Lee booth in computex 2023, and we have so many LCDs rgb’s temper glass, all of it. It looks freaking beautiful, starting with this guy right here, the 011 Vision you might be noticing uh normally there’s like bars that go between your temper, glass or like along the top or something not here. They have three tempered glass panels that all go one against each other and the one on the Top’s. Even an infinity, mirror look come on look up there now.
I know what you’re thinking having three tempered glass panels. Side by side is pretty terrifying and yes, it is, but fortunately, let’s get in here they do have a solution so that, hopefully you don’t end up with a smashed PC case before to even put how do I get this off? Oh there we go as you can see, you can take off the top and side panel, the front one. You can technically take out bit of a pain in the ass.
They don’t recommend it for users. This though there is a concern that this front bit, you could smash it if you’re, you know, building a case in here and stuff, so instead they’ve had it just so that you can take the entire motherboard Trail. This has a couple of advantages. First of all, the back of the case you’re not going to scratch it up while you’re moving it all around and building your PC, and also this right here can go in many different ways.
If I can figure out how to take it out there we go so you can build your entire PC on this, but then you can also move it up into this location. If you want to have a great big AIO down at the bottom for cooling or you can move it down and have room for 240 AIO back here for just heaps and heaps of cooling for those three tempered glass panels, you might think this will be brutally Expensive, but it’s actually going to come in at just 139 dollars. Availability is going to be next October. This October. That’S fine! Moving on here’s, the new 011 RGB! Now you might have noticed that in the past this just had a single RGB strip that went down right here.
That’S not enough RGB! Now it goes all the way around up here and across on the top and the bottom. This is achieved by using silicone for the light diffusion and there’s 51 rgbs for each of these. If you take a look at the back, you can see it’s a little L channel, so it goes up, gets diffused, bounce out and looks beautiful, that’s pretty cool! I don’t know if it’s good as the bioluminescent one that I made but uh good job, guys moving on uh where’s where’s, the GPU there’s normally a GPU right here, it’s uh! Actually, this is not a distribution plate back, but this is where the GPU is in the new o11d Evo XL. This thing is pretty funny. I don’t really know why you’d want to have your GPU back there, but it is a very interesting spot. To put it now, this has a couple of problems, mostly uh. How do you get your display cables in there? It’S a bit of a pain in the ass, so what you have to do you come in here. Take off this yeah that one there there we go, so you have to fish your display, Cable in through this little grommet back here in through the case and then drop it off down in there. It won’t be too difficult if you’re, using soft tubing or just an air-cooled GPU, because this whole panel right here can move out.
You can plug it in push it back in all good. If you have a hard one, water cooled one like this, it’s going to be, it won’t be easy, but it’s going to look really sweet thanks to secret lab for sponsoring. Today’S video secret lab chairs are engineered to keep you incredibly comfortable for long hours at work and play their Titan Evo 2022. Chair keeps you feeling comfortable for longer, with four-way lumbar support and Ultra comfortable line of different seat materials and more all chairs come with up to a five-year extended warranty and a 49-day return policy head to the link in the description to check out secret Labs. Today, maybe, though, putting your GPU on the side, that’s that is not displaying it enough. You just spent four grand or whatever on that puppy.
You need to show it off, and the sup 01 does that look at this right up in the front. They are just showing off your GPU for the whole world to see now. Gpus come in many different widths, so you can actually unscrew this and move it around so that your GPU will always be perfectly centered. This also helps to prevent graphics card sag because well it can’t sag it’s standing straight up.
They do have a bracket back here to make sure that it’s held in place and properly secured and putting your display cables once again. Huge pain in the ass you’re gon na have to go all the way around. Let’S go to the one that doesn’t have a PC in it for the display cable. You have to go in the back grommet here down through here up over top of your hard drives and plug it in something like that once again, not very practical, but it does look friggin Sweet. Let’S have a look at the airflow for the airflow on the sup, your GPU is having air pulled in beside it, and then it’s coming out the back right here beside that is a 360 millimeter radiator for your CPU, that’s intaking here and you can kind of Decide the balance between CPU cooling and GPU cooling based on what’s intaking and what’s pushing out there. The real advantage of doing a computer case like this is that it allows them to have the footprint be pretty small like vertically it’s pretty large.
But this is a 45 liter case and it’s not like sticking out this way too much or this way a whole lot. Instead, it’s vertically sticking out quite a bit. You do have to note, though, if you, a small desk airflow on the back, is very important and you cannot just jam it up against the wall. Moving on to the next Generation dk07. This has a lot of practicality upgrades, so it has the same pdlc. You see me, you see me knock glass right here, it’s super cool. It has a little like you know the LCD crystals they do so you can see it or not, see it very awesome, but the biggest problem with the last one was that the glass panel was just freaking huge. It was this large and that has two problems.
First of all, if you wanted to just like work on your computer, like oh hey, I need to do something blah blah blah. It was a two-person job to lift up that whole massive piece of glass, so this is way easier to service for one person now. Also, it helps a lot with packaging, so the last one like when I built it. It came in this massive crate because the crate has to be well as large as the glass panel that you’re putting in there.
So this way they can have the crate half as big, and it’s way more Ikea like they can just you know, take the box, carry it up the stairs into your apartment or whatever it’s all fine and good before it was this Mass of thing that I Don’T know you need to like forklift it into your second story window or something huge pain in the ass here. They also have a couple of cool features, so uh without having glass all the way over. They can have a little cubby right here for all of your. I don’t know pens and whatnots and then on the other side, they have a little Tech cooler so that you can put your little Coca-Cola in here and have it just absolutely frigid also because it is a tech.
You can push the button right here and have it heat or cool very nice also back here. They have a little USB hub, although the features of this desk are not nailed down yet so put in the comments down below what you want to see. What you will be seeing, though, is an absolute explosion of LCD screens and computers. Take a look at this right here.
It’S the uni fan TL LCD. Is that right, sweet, as you can see, there’s an LCD screen right here and the engineering required to get that to work was a huge pain in the ass now this does come with a bit of a performance drop so compared to the normal ones. These right here do about 75 CF Femmes. The LCD goes down to about 65, but it is crazy, the stuff that they have done to get the display in here, so the bearing itself needs to be Hollow so that you can, you know, put stuff through it. The shaft for the fan also has to be Hollow because you know you need to put the cables and stuff through it, and the LCD screen itself is mounted onto the bearing carrier for the fan blades.
Also, as you can see here, the fan blade extends up to be flush with the LCD screen, so it has to be kind of cut down in it’s a pretty strange, but I think that the final effect is going to be really sweet. I really want to see what you guys can pull off with a whole bunch of these you’re, going to be able to connect six LCD fans to a single Hub or 16 normal fans, and you can kind of mix and match. So here we have 10 fans.
All running off of a single Hub, pretty good, now Lily’s been doing this for a while, where they have their daisy chain fans. So you know you have your bank of fans here and it has the cable. It just comes off like that. Great absolutely love it. The problem, though, is that the cable in the past could only go on one side, so I’ve done this personally in tynan’s PC, you put all your fans on, you put it in the case. You put it up in there and you’re like ah crap.
The cable is coming at the wrong side. Then you have to take all the fans off a room, I’m a huge pain in the ass, not a problem anymore, as you can see here now they have the male and female ends of the cable on both sides. That means that you can totally screw it up, doesn’t matter which way this goes on. You can just connect it to your fans, all good to go great. Oh wow, the uh show floor officially closes at five and they cut the power out 505. So you can’t see how beautiful the RGB is on these, but hopefully there’s b-roll of it we’ll see how well we did anyway.
We have three new radiators here, starting off with the Galahad Trinity performance. This one right here has a double thin stack. So if we look at the radiator here on the top, we’ve got the performance one and you can see that there’s double the fin stack of the normal one down here. That gives you about 30 extra watts of CPU cooling, which, given how hungry they have been for heat dissipation, is going to be very welcome.
I’M sure they also have three different options for the little RGB diffuser chummy here. So we have the completely frosted one. So you have like you know: color there color here looks really sweet. They also have the double infinity mirror one where you have two different colors that are reflected a whole bunch of times and if you just need another LCD screen in your system, they’ve got that too. Over here, the Galahad to LCD has an ace attack pump. So these ones right here they have their in-house design.
Non-Performance 3200 RPM Performance 4200 RPM. But if you just want that Ace attack, reliability, we’ve got that right here. I’M not entirely sure why you need to have Ace attack taking all of your money for royalties but uh. They do have it here.
Apparently, it’s a trusted brand name just like. I trust that we’re going to go home now we’re going to go down. So if you like, this video hit like get subscribed and just have a great old day, .