Hi, this is Wayne again with a topic “Dental Chair with Operating Unit Parts and Functions”.
This is more than advanced here used for dental treatment. There are two types: the one is portable dental chair, the other one is non portable, so this is the non portable that cannot be removed and that he cannot be movable. It is attached with a floor now parts of the dental chair, the first one is seat. Then armrests armrests, backrest, headrest seat cover base main switch setting switch now the dental light. It has been called dental light operator, light and burn.
It should be keep 30 to 15 inches away from the patient. It should not be shine in patients eye. It must be protected with plastic wrap, aluminum foil. It must be removed and replaced after every patient.
You now the dental chair control. These buttons are pushed to move share according to convenience of clinician, to change the position of the patient. According to the clinician path, it can be moved backward, it can be moved forward. We can reset the chair after the completion of dental treatment boots in normal position. It is automated or it can be set manually cup or disposable, glass holder. We can take the cup and place it in its position. It is for patient to take in water during procedure and then gargle and spit out in this patent bowl.
It is provided with water supply to clean the bowel and push it to push it toward the drain. The chair also contains a tissue holder for the patient to take it out and remove the dripping water. The modern advanced dental chair also contains the led.
This is used for patient to make them see all treatment if they wanted to. It. Has a camera stick attached that has to be inserted in mouth of the patient and displays the whole treatment on LED? It has a movable instrument, tray that can be moved easily as per according to the convenience of clinician. This tray is used to replace or place the napkin on which the instruments are placed now the air-water strain it has two buttons. The first one is for water and the second one is for ear. It supplies a focal stream of compressed air water or combination of both.
It is used to clean a tooth surface during dental treatment. Next one is handpiece, it contains a bird. It is used for the trimming of the tooth, for example, for fillings for crowns. It can be used by the foot pressure. It also contains the water flow next and more most important is motor handpiece. It is used for the impacted tooth and removal of the broken down roots to drill out the bone and remove the tooth particles easily. It also contains water inlet. This is also a plug for a headpiece. We can keep two handfuls at a time in the tray and the last one is plug for the scaler tip.
It is used by footsteps. It’S speed and water can be controlled. There are three buttons downside d’etre.
These three buttons are used to control this field, air and water. For the scaler and burn foot control motor. It is used when both of the hands are engaged. It has same operating button as manuals, but SEOs can be considered safe, as in it can be operated by foot press while maintaining the instruments utilization to not be touched by hands frequently during the dental procedures, and the dental chair also contains and the hand and the Dental chair also contains the tray for the assistant.
There are many buttons on this tray for the use of a system to assist the clinician. It has the power button for light for reset the position of dental chair and for flow of water. The air controls raise the suction pump to assist the tea machine during the procedures. It can be moved easy. You .