Hi, this is Wayne again with a topic “Creality K1 Speedy 3D Printer Review”.
But before we start, today’s video subscribe to our Channel hit the Bell notification icon and like share and comment to this video today I’ll be trying out the creality K1 Max 3D printer. This device has Lightning Fast Printing speeds and is fully automated, making the printing process. So easy, let’s check it out. The first thing I noticed about this printer was its size. This thing is massive, giving you so many more options when compared to other smaller 3D printers inside the box, you’ll find the power source, the touchcreen, a roll of filament and all the tools you’ll need to get started.
It also comes with an upgraded ceramic, heater and hot end which help produce those 600 mm pers. Second, printing speeds. These rubber feet help stabilize a machine, and this spool holder right here attaches to the back of the unit and holds the wire Spool in place. Before we begin, it’s highly important that we read the instruction manual, the only thing we need to assemble on this printer is a touchcreen. It installs right at the front of the printer, and all you need to do is connect the ribbon, cable and snap. The touchcreen right into place make sure it’s snug and check to see if the door still opens. If it doesn’t, you don’t have it installed properly. Now we can connect the power cable to the back of the unit.
This is a 120 volt power source. Next, we’ll install the wire spool holder, it snaps right into place by turning it clockwise right at the back of the unit. This printer can accept pretty much any filament, but it works so much better. Using creality filaments place, the spool on the holder then run the filament through this white tube. Until you can’t push it in anymore, once it stops, it’s ready to go now we can take off the sticker on the air filter, which is completely removable and repl placeable carefully place. The top glass on the printer having glass surrounding this entire printer is really cool. Cuz, you can keep an eye on your prints at all times and speaking of keeping an eye on your prints, there’s a built-in camera inside which videotapes the entire process. Now this step is highly important, so pay attention.
There are three screws inside of the printer marked with these yellow arrows. These need to be removed before powering on the printer. Here’S another look at the three screws make sure you identify and remove each one or else serious damage can occur to your printer. Now that that’s taken care of it’s time to power on the printer and see how it works, it’s got both an AI camera and a lar sensor built into it. The initial setup takes only minutes and everything is done right here on the touchcreen once setup, you can connect up to 12 printers in unison and print massive projects, all at once.
It’S also 12 times faster than other printers on the market, thanks to its 600 mm/. Second, printing speed and 20,000 mm. Second acceleration.
I know it’s hard to see, but this printer is connecting to our Wi-Fi, so we can make prints remotely from anywhere around the world. The printer can also be connected to the creality mobile app, which gives you full control over the printer and gives you access to thousands of user generated prints. Once the setup is complete, the printer will go through a self check process. This takes about 15 minutes and it’s highly important to ensure that everything is functioning properly on the printer.
The best thing about it, though, is that it’s fully automated, so you don’t have to do any work. All the updates and software can be installed right on the printer while that downloads, Let’s scan the QR code inside the instruction booklet, so we can get to know the K1 Max it’ll. Take you to creality Cloud where you’ll find all the information you need on every single creality device out there inside the cloud.
You’Ll also find a link to download the creality mobile app here. You’Ll have access to thousands of official and user created prints, which you can download straight to your device and print at any time. Some of these prints are highly detailed and absolutely amazing. With the creality K1 Max, the opportunities are endless in the app. You can also manage your workbench here.
You can add your device, so we’re going to add the K1 Max, so we can make prints straight from the app. The app setup is straightforward and very similar to the setup on the printer simply scan the QR code with your cell phone and the printer will connect automatically easy. As that now you have full control over the printer right on your cell phone and you can make prints from anywhere with the touch of a button. You can even access the camera right on the mobile app and take recordings of your prints in real time.
The app tells you the temperatures on the nozzle, the hot bed, the chamber, and it even gives you your printing speed. You can load files straight to the printer or make prints right from your mobile device. It’S finally time to make our first print we’re going to keep it simple and do a print. That’S loaded straight onto the device, this one’s pretty popular, it’s called Benji and it’s a small boat. That’S highly detailed and really cool with the push of a button. The printing process is already started. This device is equipped with hands-free, Auto leveling. It’S got an array of sensors built right into the hot bed, giving you the most accurate, leveling MH. It also has dual cooling fans, so your model hardens before any stringing or warping occurs. The new built-in ceramic heater can achieve 200 C temps within 40 seconds. This cuts down prep time significantly, so you can start your print right away. The printer’s ultra quiet too, thanks to the built-in g sensor, which eliminates ringing and detects even the slightest vibrations.
I’M still Blown Away by the Lightning Fast Printing speed on this device. Most printers function at 50 mm/. Second, so seeing this device go 600 mm per second is absolutely insane. It’S got a sturdy frame as well to handle these powerful speeds.
There’S nothing quite like watching. Your wildest ideas come to life right before your very eyes. With this printer, you can print just about anything.
Each creation is highly detailed and extremely durable and, as you can see, there’s very minimal stringing and no warping whatsoever with the creality K1 Max. The opportunities are Limitless and you can print your wildest ideas from anywhere around the world straight from your mobile device. If You’ like to learn more about the K1 Max or any other product from creality check out the link below and thanks for watching .