Hi, this is Wayne again with a topic “CatchFace Fingerprint Keyless Smart Lock”.
But before we start today’s video subscribe to our Channel hit the Bell notification icon like share and comment to this video today I’ll be installing the smart door lock, it’s got a built-in fingerprint scanner and a touch sensitive keypad. The installation process is easy and all you need is a screwdriver first. We need to install these studs into the back of the outdoor handle carefully run the power wire through the inside of the longer piece and install it into the handle as well. Now we can remove the old door handle, most of them will have two screws on the interior handle, remove these two screws, then the two door handles and finally the latch insert the new door latch with the low part facing outside, insert the exterior handle into the Door latch: there are three holes for the studs, so everything should line up easily. Now we can install the interior handle next, we need to remove the battery cover. Plate is done by taking out this screw with the given hex wrench.
The store, lock is powered by four AAA batteries and it’s very efficient on power as well. Insert the power wire through the back of the Interior handle it’s best to hold both door handles with one hand during the step, while you insert the screws with the other lightly, tighten the screws by hand and make sure that they’re seated properly, you don’t want them To strip the second screw can be a little tricky to insert you’ll have to press down the door handle to get this into the slot. Now we can connect the power wire and insert the batteries.
You can now reinstall the battery cover plate. The last step in this installation is to remove the old door strike and install the new one. The door lock is programmed through the TT lock app, which is available for both IOS and Android, be sure to allow all permissions so that the app can function properly. Click, the plus sign, so that we can add a new Smart, Lock, select door lock, then press a button on the door handle to wake it up will automatically recognize the door lock, prepare it for programming.
You can change and assign passcodes in the app making. This a great option for rental properties, the most convenient feature on this door lock is the fingerprint scanner you can assign multiple fingerprints for everyone in the family and it takes only a second to get in the house. This is a huge Improvement when compared to a traditional locking key. The Apple also notify you whenever there’s activity at the door.
If you’d like to learn more about this Smart Lock, you can visit the link in the comments below .