Hi, this is Wayne again with a topic “Boots Industries BI 2.5 Delta Printer”.
All right, so my name is jonathan with the boots industries at maker faire new york 2014. and today we’re presenting our bi version 2.5, which is a kickstarter, backed 3d printer, we’re shipping 300 units of these printers in four weeks to our backers. This unique is a very good unit. It has a large build volume, strong construction with zinc, alloy corners injection molded parts. It’S a statement from any direction. You can see the parts being built. We offer a heatbed that goes up to 100 degrees celsius as cd. It can also be controlled wirelessly with the printer, clear and module. If you have a raspberry pi, we have a custom version of a rifle hose.
It’S based on the ethanol chip, the mega we’ll be offering these units in about six weeks on our website for uh. Next day’s shipping, so if you guys are interested always please visit us at industries.com, we’re using a cable drive, it’s a really strong, braided cable that doesn’t have any elevation and we have a custom solution with pom insert it’s a novel system that is not really being Used by any other delta printer’s office, we have optical end stops that are our own design, they’re pretty repeatable, i think they’re, one of the best end stops out there from our testing. The printer also comes with okay leveling. We have our own ultra leveling solution. It’S our own chip as well. It has the bouncing built-in features so all around it’s one of the better deltas that you can find out there .