Hi, this is Wayne again with a topic “iPhone 6S – No More Bend?”.
What’S up guys Lew here back with another video, and today I’ve got a world exclusive, for you in front of me is the back plate from the upcoming iPhone 6s. Yes, the phone that doesn’t even exist. Yet you also probably noticed this. The world famous bendgate, iPhone 6 plus, which started this entire extravaganza surrounding the idea of these iPhones bending, but it looks like Apple, is making some changes. Based on my inspection of this new upcoming iPhone 6s, we see some adjustments here in various measurements when I’m analyzing the new 6s backplate compared to the standard 6 backlight. So I’m going to get rid of the bendgate phone for a minute, because we’re not analyzing that one in this article here are the two shells on the Left. I have the backplate from the regular iPhone 6 and over here on the right in gold.
Is the one from the upcoming 6s? I also have a digital caliper here which can take measurement all the way down to point zero one millimeters now upon inspection at first glance, they look to be exactly the same. You will notice that the screw layout is a little bit different, but what caught my attention immediately was the fact that this area over here around the home buttons, as well as the area around the other cutouts, where the power switch would be appear to be significantly Thicker on the 6s backplate compared with the standard six now, of course, this is important, because this area right here is where Bend Gates started, I’m going to go ahead and do some measurements here, we’ll start with the major ones the height. Now, as I mentioned, these are going to be very similar and close, but ever so slightly different top to bottom on the 6s backplate a reading of 138 point two six millimeters with the original six 138 point: zero, nine ever-so-slight on the difference there I’ll slide that Out and the same thing happens when you’re measuring the width, the old iPhone, sixty six point, nine one, the new one – 67.1 six, so seems insignificant, but it isn’t insignificant because of the specific areas that contribute to that new dimension. Of course, as I mentioned before, the most significant near the volume button, so the old phone is a very precise measurement right, where the volume buttons are one point: one four millimeters just over one millimeter now on the new show the new reinforced 6s one point: nine, Zero almost twice as thick in that very important region, okay, so it’s obvious that Apple has increased the thickness at various weak points in the back chassis of the iPhone 6s when compared to the six. But the question is: will this result in a heavier overall device? So I’ve got a little postal scale over here, the regular iPhone 6. You can see it comes in at 27 grams and now for the new shell, 25 grams. So, what’s interesting here is not only do we have what look like enhancements, but we also have an overall lighter shell. This evidence here appears to point in the direction of a new material, potentially that rumored 7000 series aluminum, which is not only going to be thicker in some key points here, but also probably going to be stronger in general. So, coming up very shortly on the channel I’ll, be testing that I’ll be comparing these two when it comes to potential bends.
So stick around for that a sort of some evidence here that Apple took bendgate seriously. But it looks like this time around everyone’s going to end up with a stronger iPhone than the previous gen thanks very much for watching stick around stay tuned for more exclusive information on the upcoming iPhone 6s as well as tests. I’Ve got some other components that I’ll be showing you very shortly so make sure to subscribe and leave a thumbs up. If you enjoyed this content I’ll catch on the next episode later guys. .